メインコンテンツまでスキップ

H610Sをクラスタに追加したあとの「BIOS設定が正しくありません」に関する警告

Views:
72
Visibility:
Public
Votes:
0
Category:
h-series<a>1086694</a>
Specialty:
solidfire
Last Updated:

環境

NetApp H610Sストレージノード

問題

クラスタに新しいノードまたは交換用ノードを追加すると、 hardwareConfigMismatchnodeHardwareFault 次のようなアラートが記録されます。
  • Incorrect bios setting "CPU Stepping" should be == <0> but is <7>
  • Incorrect bios setting "System RAS Type" should be == <0> but is <6>
  • Incorrect bios setting "ME PTT Supported" should be == 0 but is 1
  • Incorrect bios setting "PCIE Port assigned to LAN" should be == <0> but is <5>
  • Incorrect bios setting "PCH Stepping" should be == <0> but is <53>
  • Incorrect bios setting "Gbe Region Valid" should be == [00]Disable but is [01]Enable
  • Incorrect bios setting "Anti Flash Wearout Supported" should be == 0 but is 1
  • Incorrect bios setting "IP Port" should be == <65535> but is <443>
  • Incorrect bios setting "FPK Port 3 Present" should be == 0 but is 1
  • Incorrect bios setting "FPK Port 2 Present" should be == 0 but is 1
  • Incorrect bios setting "FPK Port 1 Present" should be == 0 but is 1
  • Incorrect bios setting "FPK Port 0 Present" should be == 0 but is 1
  • Incorrect bios setting "Current IPMI over LAN" should be == [FF]Unknown but is [01]Enabled
  • Incorrect bios setting "CPU_MODEL_01" should be == Intel (R) Xeon (R) Gold 5120 CPU 2.20GHz but is Intel (R) Xeon (R) Gold 5120T CPU @ 2.20GHz
  • Incorrect bios setting "CPU_MODEL_01" should be == Intel (R) Xeon (R) Gold 5120 CPU 2.20GHz but is Intel (R) Xeon (R) Silver 4126 CPU @ 2.10GHz
  • Incorrect bios setting "CPU_THREADS_01" should be == 28 but is 32
  • Incorrect bios setting "CPU_CORES_ENABLED_01" should be == 14 but is 16
  • Incorrect bios setting "CPU_CORES_01" should be == 14 but is 16
  • Incorrect bios setting "CPU_THREADS_00" should be == 28 but is 32
  • Incorrect bios setting "CPU_CORES_ENABLED_00" should be == 14 but is 16
  • Incorrect bios setting "CPU_CORES_00" should be == 14 but is 16
  • NETWORK_FIRMWARE_VERSION_ETH1 should be == 14.20.1010 (MT_2420110034) but is 14.22.1002 (MT_2420110034)
  • NETWORK_FIRMWARE_VERSION_ETH0 should be == 14.20.1010 (MT_2420110034) but is 14.22.1002 (MT_2420110034)>
  • Incorrect bios setting "allow_correctables" should be == enable but is null

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.