メインコンテンツへスキップ

クラスタ lif からクラスタ lif への ping 時にパケット損失が継続する

Views:
90
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

環境

  • ONTAP 9
  • Cisco Nexusクラスタスイッチ

問題

  • あるノードのクラスタLIFから別のノードのクラスタLIFへpingを実行するとpingパケットがドロップされ、イベントログに以下のアラートが表示されます:

[Node1: vifmgr: vifmgr.cluscheck.ctdpktloss:alert]: Continued packet loss when pinging from cluster lif Node1_clus2 (node Node1) to cluster lif Node2_clus2 (node Node2)

[Node3: vifmgr: vifmgr.cluscheck.ctdpktloss:alert]: Continued packet loss when pinging from cluster lif Node3_clus1 (node Node3) to cluster lif Node4_clus2 (node Node4)

  • このためクラスタネットワークが劣化し、以下のイベントが報告されます:

[Node1: vifmgr: callhome.clus.net.degraded:alert]: Call home for CLUSTER NETWORK DEGRADED: Large MTU Packet Loss - Ping failures detected between Node1_clus1 ( 169.254.XXX.XXX ) on Node1 and Node2_clus1 ( 169.254.XXX.XX ) on Node2

  • ノード上のすべてのクラスタポートは、9000 MTU で構成されています:

Cluster::> network port show

Node: Node1
                          Speed(Mbps) Health
Port    IPspace    Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
e0a     Cluster    Cluster      up  9000  auto/10000 healthy
e0b     Cluster    Cluster      up  9000  auto/10000 healthy

Node: node2
                          Speed(Mbps) Health
Port    IPspace    Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
e0a     Cluster    Cluster      up  9000  auto/10000 healthy
e0b     Cluster    Cluster      up  9000  auto/10000 healthy

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.