メインコンテンツまでスキップ

Cisco Nexusファブリックエクステンダへの接続時にコントローラがパニック状態になる

Views:
122
Visibility:
Public
Votes:
1
Category:
fas-systems
Specialty:
hw
Last Updated:

環境

  • FAS9000
  • FAS8200
  • FAS27x0
  • FAS26x0
  • AFF A200
  • AFF A220
  • AFF A300
  • AFF A700
  • ONTAP 9
  • QLogic 8324 CNA
  • Cisco Nexus 2348UPQファブリックエクステンダ(FEX)
  • Cisco Nexus N2K-C2232PP-10GE ファブリックエクステンダ(FEX)

問題

  • QlogicアダプタをNexus FEXに接続すると、ストレージノードがパニック状態になる
PANIC : PCI Error NMI from device(s):RPT(0,3,3):QLogic FC/10GbE CNA on Controller.
version: 9.5P15: Tue Nov 17 02:40:18 EST 2020
conf : x86_64.optimize
cpuid = 4
KDB: stack backtrace:
vpanic() at vpanic+0x6d9/frame 0xfffffe0258b59c50
panic() at panic+0x43/frame 0xfffffe0258b59cb0
platform_os2sp_port_present() at platform_os2sp_port_present+0x259/frame 0xfffffe0258b59ce0
psl_search_list() at 0xffffffff8213db10/frame 0xfffffe0258b59d20
generic_nmi_handler() at generic_nmi_handler+0xe4/frame 0xfffffe0258b59d60
trap() at trap+0x7f0/frame 0xfffffe0258b59f20
Xnmi() at Xnmi+0xd3/frame 0xfffffe028649e470
ql_rdwr_indreg32() at ql_rdwr_indreg32+0xca/frame 0xfffffe028649e4b0
ql_minidump() at ql_minidump+0x77a/frame 0xfffffe028649e660
ql_del_cdev() at ql_del_cdev+0x85f/frame 0xfffffe028649e800
devfs_allocv() at devfs_allocv+0x29dc/frame 0xfffffe028649e850
kern_ioctl() at kern_ioctl+0x230/frame 0xfffffe028649e8c0
sys_ioctl() at sys_ioctl+0x16c/frame 0xfffffe028649e990
amd64_syscall() at amd64_syscall+0x18b/frame 0xfffffe028649eab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe028649eab0
--- syscall (54, FreeBSD ELF64, sys_ioctl), rip = 0x8004cd23a, rsp = 0x7fffffffea58, rbp = 0x7fffffffeb40 ---
 
PCI Error NMI from device(s):ErrSrcID(CorrSrc(0x2900),UCorrSrc(0)), RPT(0,2,0):QLogic FC/10GbE CNA in slot 2 on Controller.
  • ストレージノードがパニック状態からブートしたあと、CNAポートがファームウェアの初期化状態で停止する

cluster::> run -node node1 sysconfig -v 2
        slot 2: Fibre Channel Target Host Adapter 2a
                (QLogic CNA 8324 (8362) rev. 2, <INITIALIZING FIRMWARE>)
                Firmware rev:      8.9.0
                Flash rev:         6.0.1
                Host Port Addr:    000000
                FC Nodename:       50:0a:09:80:80:72:e6:d6 (500a09808072e6d6)
                FC Portname:       50:0a:09:88:80:72:e6:d6 (500a09888072e6d6)
                Connection:        No link
                Switch Port:       Unknown

  • スイッチからの接続が  フラッピングしているか、接続されていないか、正常である可能性があります。
  • これは、Ciscoスイッチがバージョン9.3(8)にアップグレードされたときに発生することがあります。

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • この記事は役に立ちましたか?