「BIOS POST Failure（s）detected」というメッセージでノードをブートできませんでした。autobootを中止"

最後の更新
PDFとして保存

Views:: 187

Visibility:: Public

Votes:: 0

Category:: fas-systems

Specialty:: hw

Last Updated:

環境

FAS / AFFプラットフォーム

問題

ノードがブートに失敗して次の出力が表示される

System BIOS shadowed USB 2.0: MICRON eUSB DISK BIOS is scanning PCI Option ROMs, this may take a few seconds... WARNING 02A1: SP Not Found ERROR No Response to Controller FRU ID Read Request via IPMI ERROR No Response to Midplane FRU ID Read Request via IPMI Boot Loader version 4.3 Copyright (C) 2000-2003 Broadcom Corporation. Portions Copyright (C) 2002-2014 NetApp, Inc. All Rights Reserved.CPU Type: Intel(R) Xeon(R) CPU C3528 @ 1.73GHz BIOS POST Failure(s) detected. Abort AUTOBOOT LOADER>

または

システムメモリを初期化しています...

Loading Device Drivers ... Waiting for SP ... SP failure. Resetting SP from primary FW. This can take a few minutes Waiting for SP ... SP failure. Resetting SP from backup FW. This can take a few minutes Waiting for SP ... Failed to recover SP IPMI:Get controller FRU inventory:failed Configuring Devices ... IPMI PCI Slot Control failed.

CPU = 1 Processor(s) Detected. Intel(R) Xeon(R) CPU D-1528 @ 1.90GHz (CPU 0) CPUID: 0x00050663. Cores per Processor = 6 32768 MB System RAM Installed. SATA (AHCI) Device: SV9MST6D120GLM41NP

BIOS POST Failure(s) detected: SP IPMI failure. Abort AUTOBOOT

マザーボードを取り付け直しても問題が解決しない