SASケーブルが停止しています(取り外し済み)
環境
- Data ONTAP 8
- ONTAP 9
- Serial-Attached SCSI(SAS)
問題
- [System Storage Configuration]が[Multi-Path]から[Single-Path]に変更されました。
- では
sysconfig -a
、SASポート0aがオフラインと表示されていますが、ケーブルの情報を確認できます。
例:
slot 0: SAS Host Adapter 0a (PMC-Sierra PM8070 rev. C, SAS, <OFFLINE (hard)>)
Firmware rev: 03.08.09.00
Base WWN: 5:00a098:003c394:30
Phy State: [0] Enabled, Rate unknown
[1] Enabled, Rate unknown
[2] Enabled, Rate unknown
[3] Enabled, Rate unknown
Mini-SAS HD Vendor: XXXXXXXX
Mini-SAS HD Part Number: 112-00435 A0
Mini-SAS HD Type: Passive Copper (unequalized) 0.5m ID:00
Mini-SAS HD Serial Number: XXXXXXXXX
- で
ENVIRONMENT
、ポート0aに接続されているシェルフのケーブル情報を特定できません。
例:
SAS connector attached element list: 3, 5, 7; with error: none
SAS cable information by element:
[1] Vendor: (disconnected)
Type: ID: Swaps: 0
Serial number: Part number:
[2] Vendor: (disconnected)
Type: ID: Swaps: 0
Serial number: Part number:
[3] Vendor: XXXXXXXXXX
Type: MINI-SAS HD passive copper 0.5-1.0m ID: 00 Swaps: 0
Serial number: XXXXXXXXX Part number: 112-00435+A0
[4] Vendor: (disconnected)
Type: ID: Swaps: 0
Serial number: Part number:
[5] Vendor: XXXXXXXX
Type: MINI-SAS HD passive copper 0.5-1.0m ID: 00 Swaps: 0
Serial number: XXXXXXXXXXXXXX Part number: X66030A+A0
[6] Vendor: (disconnected)
Type: ID: Swaps: 0
Serial number: Part number:
[7] Vendor: XXXXXXXX
Type: MINI-SAS HD passive copper 0.5-1.0m ID: 01 Swaps: 0
Serial number: XXXXXXXXXXXXXX Part number: X66030A+A0
[8] Vendor: (disconnected)
Type: ID: Swaps: 0
Serial number: Part number: