バグ1319203の修正バージョンのNS224のセンサー7またはセンサー13の過熱警告
環境
- NS224
- ファームウェア02.31を実行しているNSM100モジュール
問題
- センサー7または13の過熱（NSMモジュールAまたはBのCPUセンサー）
[node_name: dsa_worker4: ses.status.temperatureWarning:alert]: NS224NSM100 (S/N 123456789) shelf 0 on channel 0x temperature warning for Temperature sensor 7: non-critical status; overtemperature warning. Current temperature: 88 C(190 F). This element is on the unknown location[node_name: dsa_worker4: ses.status.temperatureWarning:alert]: NS224NSM100 (S/N 123456789) shelf 0 on channel 0x temperature warning for Temperature sensor 13: non-critical status; overtemperature warning. Current temperature: 88 C
(190 F). This element is on the unknown location- 1時間ごとのEMSエラー：
[node_name: statd: monitor.shelf.warning:error]: Fault reported on disk storage shelf attached to channel 0x. Check fans, power supplies, disks, and temperature sensors.- storage show fault AutoSupportの出力例：
Enclosure Status: non-critical
Channel: 0x
Shelf: 0
Shelf Type: NS224NSM100
Module Type: NSM100
Temperature Sensors:
Element Status Status Bytes Status Descriptions
1: OK 01,00,2A,00
...
12: OK 01,00,2E,00
13: NONCRITICAL 03,00,6C,04 OT WARNING
14: OK 01,00,3C,00
...
17: OK 01,00,3D,00
Enclosure:
Element Status Status Bytes Status Descriptions
1: OK 01,00,02,00 FAIL
- Environment AutoSupportの出力 例:
Channel: 0x
Shelf: 10
SES device path: local access: 0x.10.1.99
Module type: NSM100; monitoring is active
Shelf status: non-critical condition
SES Configuration, shelf 10:
...
Temperature Sensor installed element list: 1, 2, 3, ...15, 16, 17; with error: 13
Shelf temperatures by element:
[1] 19 C (66 F) (ambient) Normal temperature range
...
[12] 22 C (71 F) Normal temperature range
[13] 88 C (190 F) Overtemperature warning!
::> storage shelf show出力例：
Temperature:
-- Thresholds °C --
Temp Is Low Low High High Operational
ID °C Ambient Crit Warn Crit Warn Status Sensor Location
--- ---- ------- ---- ---- ---- ---- ------------------ --------------------------------
1 19 true 0 5 52 47 normal ambient temp sensor on ODP board
2 24 false 0 5 60 55 normal temp sensor on midplane left
...
7 35 false 0 5 90 85 normal CPU package on top module
...
12 22 false 0 5 65 60 normal bottom module temp sensor near midplane
13 88 false 0 5 90 85 over-temperature CPU package on bottom module
14 45 false 0 5 85 80 normal Ethernet port 1 on bottom module
...
storage fault出力例：
::> system node run -nodde node_name -command storage show fault
Temperature Sensors:
Element Status Status Bytes Status Descriptions
1: OK 01,00,27,00
...6: OK 01,00,33,00
7: NONCRITICAL 03,00,6C,04 OT WARNING
8: OK 01,00,4C,00
...17: OK 01,00,44,00