BMC CLIでは、システムのシャットダウンや複数のセンサー情報は表示されません

最後の更新
PDFとして保存

Views:: 13

Visibility:: Public

Votes:: 0

Category:: fas-systems<a>2009232455</a>

Specialty:: hw

Last Updated:

環境

FAS500F

問題

node-02でIOM12Eモジュールの障害が検出され、node-01からのテイクオーバーが検出されます。

EMSログ

</LR> <LR d="09Jul2022 07:22:00" n="node-01" t="1657318920" id="1655365394/8541" p="0" s="Ok" o="monitor" vf="" type="0" seq="75705"> <monitor_globalStatus_critical_1 problem="This node has taken over node-02. "/> </LR> <LR d="09Jul2022 07:22:11" n="node-01" t="1657318931" id="1655365394/8542" p="3" s="Ok" o="dsa_worker0" vf="" type="0" seq="75706"> <ses_status_electronicsWarn_1 prodChannel="NS224NSM8E (S/N SHJSGXXXXXXXXXX) shelf 0 on channel 0s" typeText="SES electronics" electrNumber="2" warningMsg="communication error" warningText="; enclosure services hardware failed" locationText="This element is on the rear of the shelf at the bottom, on shelf module (B)"/> </LR> <LR d="09Jul2022 07:22:11" n="node-01" t="1657318931" id="1655365394/8543" p="1" s="Ok" o="dsa_worker0" vf="" type="0" seq="75707"> <ses_status_ModuleError_1 prodChannel="NS224NSM8E (S/N SHJSGXXXXXXXXXX) shelf 0 on channel 0s" moduleType="PCI switch" typeText="PCI Switch" ModuleNumber="2" errorMsg="status not available" errorText="; status not available" locationText="This element is on the rear of the shelf at the bottom, on shelf module (B)"/>

テイクオーバーの完了後na、ノード02のBMC CLIのIPMIセンサーが「」ステータスを表示してブートできませんでした。

SP-latest-IPMI：

=================== sensor ========================== Sensor name | reading | unit | status| lnr | lcr | lnc | unc | ucr | unr PVCCIN_CPU_FD | na | Volts | na | na | 0.490 | 0.784 | 2.195 | 2.391 | na PVCCSA_CPU_FD | na | Volts | na | na | 0.297 | 0.396 | 1.485 | 1.683 | na PVDDQ_AB_FD | na | Volts | na | na | 0.488 | 0.799 | 1.482 | 1.697 | na PVDDQ_CD_FD | na | Volts | na | na | 0.488 | 0.799 | 1.482 | 1.697 | na PVNN_PCH_AFD | na | Volts | na | na | 0.268 | 0.474 | 1.175 | 1.216 | na P0V9_PLX0_F | na | Volts | na | na | 0.293 | 0.741 | 1.190 | 1.248 | na P0V9_PLX1_F | na | Volts | na | na | 0.293 | 0.741 | 1.190 | 1.248 | na P3V_BAT | na | Volts | na | na | 2.340 | 2.652 | 3.276 | 3.354 | na

Bat_Dstg_Cycles | na | cycles | na | na | 2.000 | 5.000 | na | na | na Bat_Cycle_Cnt | na | cycles | na | na | na | na | na | na | na Bat_Power_Fault | na | discrete | na | na | na | na | na | na | na Bat_Dsg_FET_Flt | na | discrete | na | na | na | na | na | na | na Bat_Chg_FET_Flt | na | discrete | na | na | na | na | na | na | na Bat_Pack_Invalid | na | discrete | na | na | na | na | na | na | na Bat_Lrn_Active | na | discrete | na | na | na | na | na | na | na FRU Presence | na | discrete | na | na | na | na | na | na | na

BMCから障害ノード-02の電源を再投入しますが、ブートできません。