メインコンテンツまでスキップ

Nblade.CifsOperationTimedOutおよびSpinNpエラーを使用してONTAP CIFS遅延を調査する方法410

Views:
56
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
perf
Last Updated:

環境

  • ONTAP 9
  • CIFS

説明

技術情報アーティクル では、手順to check ONTAP CIFS latency with Nblade.CifsOperationTimedOut and SpinNp error 410について説明しています。

  • Nblade.CifsOperationTimedOutSpinNp エラー 410 を含む繰り返しエラーが発生し、 ONTAP CIFS のレイテンシまたは速度低下しています:

Nblade.CifsOperationTimedOut: Detected a timed out CIFS operation. SMB command for this operation: SMB2_COM_CREATE, Number of times this command was suspended: 6, Number of times this command was restarted: 0, Last CSM error during this operation: CSM_OK, Remote blade UUID: abcdef123456789abcdef123456789ab, Is QoS enabled: QoS_disabled, Last SpinNp error during this operation: 410, Client IP address: 10.x.x.x, Local IP address: 10.x.x.x, Target Vserver ID: #, Target disk's DSID: 0

  • 代替フォーム:

Day MON HH:MM:SS TIMZONE [Node_name]: kernel: Nblade_CifsOperationTimedOut_1:error]: params: {'remoteBladeID': 'abcdef123456789abcdef123456789ab', 'cmdRestartCnt': '0', 'vserverId': '#', 'commandName': 'SMB2_COM_CREATE', 'isQosEnabled': 'QoS_disabled', 'lastSpinNpError': '410', 'localIpAddress': '10.x.x.x', 'lastCsmError': 'CSM_OK', 'clientIpAddress': '10.x.x.x', 'suspensionCnt': '6', 'dsId': '0'}

  • SpinNp 410 SPINNP_ERR_OP_TIMED_OUT は  、WAFLでSpinNp操作がタイムアウトしたことを示しています。  

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device