メインコンテンツまでスキップ

コントローラの温度(PCISW Die Temp)が読み取れません

Views:
9
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw<a>2009526906</a>
Last Updated:

環境

  • ONTAP 9
  • AFF / FASシステム

問題

  • コントローラは温度センサーを読み取れず、次のイベントを報告します。

 [node-01: env_mgr: monitor.temp.unreadable:error]: The controller temperature (PCISW-3 Die Temp) is not readable.
 [node-01: env_mgr: monitor.temp.unreadable:error]: The controller temperature (PCISW-4 Die Temp) is not readable.

  • Chassis temperature is too high.. イベントに続く5月。
  • PLATFORM SENSORS.XML AutoSupportのセクションでPCISWセンサーが故障していると報告される

Sensor Name State Current Critical Warning Warning Critical
Reading Low Low High High
-------------------------------------------------------------------------------------------------
PCISW-3 Die Temp failed -- C 0 C 5 C 90 C 100 C
PCISW-4 Die Temp failed -- C 0 C 5 C 90 C 100 C

  •  SP FWが最新バージョンにアップグレードされている
  • 該当するノードのSPをリブートしても問題は解決しません。
  • テイクオーバー/ギブバックを実行してマザーボードを取り付け直したあとも、問題は維持されます。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.