メインコンテンツまでスキップ

X412_S15K7560A15ドライブで中程度のエラーが発生したため、WAFL の不一致が発生しました

Views:
20
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2009213402</a>
Specialty:
hw
Last Updated:

環境

  • ファームウェアNA08を実行するX412_s15K7560A15ドライブ
  • WAFL ユーザデータに整合性がありません

問題

  • 複数のディスク上の回復されていないメディアエラー

[?] Thu Aug 26 00:49:34 CEST [node2: pmcsas_intrd_0: disk.ioMediumError:warning]: Medium error on disk 0b.12.16: op 0x28:00b73e00:0200 sector 12009271 SCSI:medium error - Unrecovered read error - If the disk is in a RAID group, the subsystem will attempt to reconstruct unreadable data (3 11 0 81) (6551) [NETAPP   X412_S15K7560A15 NA08] S/N [3SL0PJ8Q0000904601FS]

  • RAIDにはストライプの再構築に関する問題があります(追加の書き込みが発生します)。

[?] Thu Aug 26 00:49:41 CEST [node2: raidio_thread: raid.tetris.media.err:notice]: Read error on Disk /Aggr1/plex0/rg2/0b.12.16 Shelf 12 Bay 16 [NETAPP   X412_S15K7560A15 NA08] S/N [3SL0PJ8Q0000904601FS], block #1501159 during stripe write
[?] Thu Aug 26 00:49:41 CEST [node2: raidio_thread: raid.multierr.bad.block:critical]: Marking 'Disk /Aggr1/plex0/rg2/0b.12.16 Shelf 12 Bay 16 [NETAPP   X412_S15K7560A15 NA08] S/N [3SL0PJ8Q0000904601FS]', block number 1501158, volume block number 8889490534, as a bad block.
[?] Thu Aug 26 00:49:45 CEST [node2: raidio_thread: raid.multierr.bad.missingBlk:debug]: Marking '/Aggr1/plex0/rg2', block number 1501158, volume block number 7025878758, as bad block.

  • WAFL 不整合エラーが報告されました

[?] Sun Aug 29 11:15:20 CEST [node2: wafl_hipri: wafl.raid.incons.userdata:error]: WAFL inconsistent: inconsistent user data block at VBN 8895324051 (vvbn:1003059249 fbn:693434436 level:0) in public inode (fileid:104 snapid:0 file_type:15 disk_flags:0x841a error:120) in volume vol1.
[?] Sun Aug 29 11:15:20 CEST [node2: wafl_hipri: wafl.incons.userdata.vol:error]: WAFL inconsistent: volume vol1 has an inconsistent user data block. Note: Any new Snapshot copies might contain this inconsistency.

  • 影響を受けているLUNがある場合は、で報告できます

[?] Sun Aug 29 11:15:20 CEST [node2: scsitgt_admin: scsitarget.read.RAID.error:error]: Read of LUN /vol/vol1/lun1.lun failed due to a RAID error.

  • システムのドライブの寿命は 6 年以上です

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.