メインコンテンツへスキップ

ディスク障害が発生し、ホット スペア ディスクがインストールされていない場合はどうなりますか?

Views:
595
Visibility:
Public
Votes:
0
Category:
disk-drives
Specialty:
7dot
Last Updated:

環境

  • Data ONTAP 8 7-mode
  • スペア

回答

ホット スペア ディスクが装備されていないファイラーでディスク障害が発生した場合、次のイベントが発生します。

  1. ストレージ システムはデグレード モードという状態になります。この状態では、RAID機能によってストレージ システムはデータを失うことなく稼働を継続できます(ただし、ストレージ システムのパフォーマンスに影響が出る場合があります)。
    • イベント callhome.spares.low はEMSログに記録されます
    • スペアがなく再構築できないディスクドライブが障害を起こすと、システムは「デグレード モード」になります。
  2. RAIDグループのタイプによっては、アグリゲートが「completely degraded」状態になる場合があります。
    • raid4 - RAIDグループに欠落または障害が発生したディスクが1つあります
    • raid-dp - RAIDグループに欠落または障害が発生したディスクが2つあります
    • raid-tec - RAIDグループに欠落または障害が発生したディスクが3つあります
    • ミラーされたアグリゲートは、アグリゲートの両方のプレックスで同じ位置のRAIDグループに欠落または障害が発生したディスクがある場合、「完全にデグレード」とみなされます。
  3. システムは、定義された時間間隔で「完全にデグレード」モードで動作した場合、RAIDグループの整合性障害およびデータ損失の可能性を防ぐために自動的に停止します。
    • デフォルトのタイムアウトは通常24時間です。
警告: 報告されたすべてのディスク障害はできるだけ早く交換してください。追加のディスク障害が発生すると、影響を受けるRAIDグループ内でデータが失われます。

  4.ストレージ システムは、/etc/messagesファイルおよびシステム コンソールに、次のいずれかの警告メッセージを毎時記録します。

Parity disk is broken. Halting in m hours.
Data disk n is broken. Halting in m hours.

ここで、"n"はディスクID番号、"m"はシステムが停止するまでの時間数です。

  5.システムが停止する直前に、次のようなメッセージが /etc/messages とコンソールに送信されます。

Sat Oct 29 13:26:42 PDT [statd]: When a disk is broken, the system shuts down automatically every 24 hours to encourage you to replace the disk.If you reboot the system it will run for another 24 hours before shutting down.

  6.システムが完全にデグレード モードで実行されている場合、指定された時間が経過するとシステムがシャットダウンします。シャットダウンにより、ディスク障害に気付くことができます。ディスクを修復しなくてもストレージシステムを再起動できますが、問題が修正されるまでストレージシステムは指定された間隔で自動的にシャットダウンし続けます。

追加情報

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • この記事は役に立ちましたか?